|
|||
Product overview :
SZG double taper vacuum drier is my factory in combination with the domestic like product technology developed by a new generation drying device, double cone vacuum belt, chain two-stage elastic coupling way, so equipment running smoothly. Special design of tooling, fully embodies the two axis concentric, good heat medium and vacuum system adopt reliable technology rotary joint in the United States. On this basis, we developed A SZG - A, it can be stepless speed regulation, but also for temperature control.
As a professional drying equipment manufacturers, we more than a year to serve the users, our products are from the high temperature heat conduction oil as heat medium quality, medium temperature and low temperature hot water and steam. Drying viscous material, our factory will specially designed for you in the tank or sets the ball "copy board" structure.
The working principle of:
In airtight interlayer zhongtong into thermal energy (such as hot water and low pressure steam or heat conduction oil), heat the inner shell to be dry material.
In power, driven by a slow rotation of tank, tank material mix unceasingly, thus achieve the goal of strengthening drying.
Materials in the vacuum state, the drop in steam pressure moisture (solvent) on the surface of the material reach saturation state and the evaporated, and by the vacuum pump exhaust recycling in a timely manner. Material inner moisture (solvent) to the surface infiltration and evaporation and discharge, three ongoing process, dry material in a short time to achieve.
Range of application:
Apply to chemical, pharmaceutical, food industries such as powder, granular and fiber concentration, mixing, drying and needs low temperature drying of material (such as biochemical products more applicable to the easy oxidation, volatile, heat-sensitive, intense stimulation, toxic materials, and are not allowed to destroy the crystal materials and dry.
Technical parameters :
project |
unit |
models | ||||||||||
The name of the |
unit |
100 |
200 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3000 |
4000 |
5000 |
The total volume |
L |
100 |
200 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3000 |
4000 |
5000 |
The working volume |
L |
50 |
100 |
175 |
250 |
375 |
500 |
750 |
1000 |
1500 |
2000 |
2500 |
Heating area |
m2 |
1.16 |
1.5 |
2 |
2.63 |
3.5 |
4.61 |
5.58 |
7.5 |
10.2 |
12.1 |
14.1 |
speed |
rpm |
6 |
5 |
4 |
4 |
4 | ||||||
power |
kw |
0.75 |
1.1 |
1.5 |
1.5 |
2 |
3 |
3 |
4 |
5.5 |
7.5 |
7.5 |
Rotary height |
mm |
1810 |
1910 |
2090 |
2195 |
2500 |
2665 |
2915 |
3055 |
3530 |
3800 |
4180 |
The weight |
kg |
825 |
1050 |
1350 |
1650 |
1800 |
2070 |
2250 |
3000 |
4500 |
5350 |
6000 |
The tank design pressure |
mpa |
-0.09~0.096 | ||||||||||
Mezzanine design pressure |
mpa |
0.3 |
Oil heating, the use of automatic temperature control, biological products and mineral raw materials can be dry, the temperature is between 20 ~ 160 ℃ temperature difference within plus or minus 2 ℃.
High thermal efficiency, is 2 times higher than regular oven.
Indirect heating, the material will not be polluted, in line with the GMP requirements. Equipment maintenance is simple, easy to clean.
The recommended process placed demonstration: solvent recovery process.