 |
 |
| |
|
|
|||
Detail
Product overview
：
Heat conduction inside the drum dryer is a type of rotating continuous drying equipment. Rotating cylinder through the lower part of the chute, adhesive material with a thickness of membrane, heat through pipes to the inner wall of the cylinder, conduction to the outside of the cylinder wall, conduction feeding film again, for the wet material membrane evaporation, moisture, drying the material containing moisture. Be good drying device on the surface of the drum scraper scraper roller, to in the scraper at the bottom of the screw conveyor, through screw conveyor focuses dry materials, packaging.
Product features
：
1, high thermal efficiency. Because of drum dryer heat transfer mechanism of heat transfer, heat transfer direction is consistent throughout the operating cycle, in addition to the heat dissipation and heat loss, all of the remaining heat used for tube materials on the membrane evaporation of moisture, thermal efficiency can reach 80% 90%.
2, large elasticity of operation, wide applicability. The adjustable roller drier many drying factors. Such as the concentration of the feed, the coating material of the membrane drying efficiency, and many factors involved in each other. This drum drying operation to bring a lot of convenient, make it can adapt to a variety of dry materials and different production requirements.
3, short drying time. The drying period of materials is normally 10 to 15 seconds, suitable for heat-sensitive materials. If set the roller drier in vacuum, can run under the condition of reduced pressure.
4, the drying rate. Due to the membrane material of coating put on in the wall is thin, generally in 0.3 1.5 mm, and the heat transfer and mass transfer in the same direction, material of membrane surface can keep the 30-70 kg · H2O/m2 h. evaporation.
Range of application
：
Suitable for chemical industry, dye, pharmacy, food, metallurgical and other industries fluid or more viscous material drying.
Technical parameters：
|
specifications
|
Cylinder size
mm |
The effective heating aream2 |
Drying ability
kg·H2O/m2·h |
The steam consumption of
Kg/h |
The motor power
kw |
Overall dimensions
mm |
The weight of thekg |
|
HG-600 |
Φ600×800 |
1.12 |
40-70 |
100-175 |
2.2 |
1700×800×1500 |
850 |
|
HG-700 |
Φ700×1000 |
1.65 |
60-90 |
150-225 |
3 |
2100×1000×1800 |
1210 |
|
HG-800 |
Φ800×1200 |
2.26 |
90-130 |
225-325 |
4 |
2500×1100×1980 |
1700 |
|
HG-1000 |
Φ1000×1400 |
3.30 |
130-190 |
325-475 |
5.5 |
2700×1300×2250 |
2100 |
|
HG-1200 |
Φ1200×1500 |
4.24 |
160-250 |
400-625 |
7.5 |
2800×1500×2450 |
2650 |
|
HG-1400 |
Φ1400×1600 |
5.28 |
210-310 |
525-775 |
11 |
3150×1700×2800 |
3220 |
|
HG-1600 |
Φ1600×1800 |
6.79 |
270-400 |
675-1000 |
11 |
3350×1900×3150 |
4350 |
|
HG-1800 |
Φ1800×2000 |
8.48 |
330-500 |
825-1250 |
15 |
3600×2050×3500 |
5100 |
|
HG-1800A |
Φ1800×2500 |
10.60 |
420-630 |
1050-1575 |
18.5 |
4100×2050×3500 |
6150 |
