FG boiling drier
At: FG boiling drier >>
FG boiling drier
   Detail

product The characteristics of :

Boil dry, also called fluidized bed, it is by the air filter, heater, ebullated bed host, cyclone separator and bag filter, high pressure centrifugal fan, work station, given the different natures of the drying material, dust removal equipment of form a complete set, can according to need to consider, can choose to cyclone separator and bag filter at the same time, also can choose one of them, in general the proportion of larger particles such as granule and material drying simply select cyclone separator, the proportion of lighter small granular and powdered materials need to form a complete set of bag dust catcher, and equipped with pneumatic feeding device and belt conveyor for selection.

Bulk granular solid materials by feeder to join in the fluidized bed dryer, the filtered clean air heated by the blower into the bottom of the fluidized bed by the distribution plate with solid materials contact, form the fluidization for heat and mass transfer of gas-solid. Dry material is being exhausted from port discharge, waste gas discharge from ebullated bed top by the cyclone and bag dust collector emptying after recovery of solid powder. Steam, electricity, hot blast stove with (set) according to the requirements of customers.

It is suitable for drying of granular material, such as: medicine, tablet, grain, active pharmaceutical ingredients in drug infusion of Chinese medicine, chemical raw materials of plastic resin, citric acid and other dry desiccant powder, granular materials, are also used in food and beverage granule, food processing, corn germ, feed and other dry. Material particle size up to 6 mm, best for 0. 5 ~ 3 mm.

The working principle of :

● The fluidization drying, heat mass transfer is fast;
● Under the closed negative pressure operation, no dust float in the sky ;
● Adopted antistatic filtering material, safe in operation ;
● Equipment, no dead Angle, wash thoroughly, no cross contamination ;
● G MP specification requirements 。

Industry application :

This machine is mainly applicable to the pharmaceutical, food, chemical and other industries for dry powder or granular materials .

Technical parameters:

models unit 3 5 30 60 120 200 300 500 1000
project
The raw material container The diameter of mm 300 400 700 1000 1200 1400 1600 1800 2200
volume L 12 22 100 220 420 670 1000 1500 2500
Production capacity The minimum kg/batch 1.5 4 15 30 80 100 150 250 500
The biggest kg/batch 4 6 36 72 140 240 360 600 1100
The steam consumption of kg/batch 12 23 70 140 211 282 366 465 800
Compressed air volume M3/min 0.3 0.3 0.3 0.6 0.6 0.9 0.9 0.9 1.5
The fan power kw 2.2 4 5.5 11 18.5 22 30 45 75
The temperature Room temperature to 120 ℃ automatic adjustment
The material yield % >99
Operating time min 15~30(Depending on the specific material )
The final moisture content % ~0.2(Depending on the specific material )
The noise dB ≤75
The host is highly mm 2100 2300 2500 3000 3300 3800 4000 4800 6200

 

Note: depending on the different materials are changed when some parameters design will be subject to design .


Company

News

Products

Equipment selection

Contact us