 |
 |
| |
|
|
|||
DetailProduct features ：
● Especially for big viscosity, paste, paste shape material effect is better, other equipment cannot be replaced.
● Experimental many varieties, low temperature drying application widely .
● Nozzle structure is simple, easy maintenance, low operating cost.
The working principle of ：
Clean air into the drying tower after heating, hot air in tower using two (or three) fluid fluid nozzle to all kinds of material liquid materialized into tiny droplets, fast heat exchange with the hot air, evaporate in the liquid water or solvent), and with the hot air discharge, powder products.
| Parameter/model | 5 | 25 | 50 | 100 | 150 | 200 | |
| evaporation | △t=150℃～90℃ | 1.5 | 7.5 | 15 | 30 | 45 | 60 |
| △t=200℃～100℃ | 2.5 | 12.5 | 25 | 50 | 75 | 100 | |
| △t=250℃～100℃ | 3.75 | 18.75 | 37.5 | 75 | 112.5 | 150 | |
| △t=300℃～100℃ | 5 | 25 | 50 | 100 | 150 | 200 | |
| △t=350℃～110℃ | 6 | 30 | 60 | 120 | 200 | 240 | |
| Compressed air pressure m3/nin | 0.9 | 0.9 | 1.1 | 1.5 | 2.7 | 3.4 | |
| Compressed air pressure Mpa | 0.4 | 0.6 | 0.7 | ||||
| The heat source way | Electricity, electricity + steam, coal (oil) hot blast stove | ||||||
| Heating load 104KCal/h | 1 | 5 | 10 | 20 | 30 | 40 | |
| The fan power KW | 0.75 | 4 | 7.5 | 11 | 15 | 18.5 | |
|
Note: depending on the different materials are changed when some parameters design will be subject to design. . | |||||||
