Product overview
　　

ZGH type vertical high-speed mixer is designed for powder mixing and high mixing machine equipment development of high-speed, solved the food, pharmaceutical and other industries for many years to all kinds of powder materials mixing water to wet material process problems. Before most manufacturers are using channel mixer, v-shaped mixer, two dimensional mixer, three-dimensional mixing equipment such as mixer, but have uneven mixing time, mixing, small reunion and the common fault of the small pieces more, manufactured products have off color, taste and component content is different, so that product quality is not stable, not beautiful appearance.

ZGH type vertical high-speed mixer is a concentration of advanced technology at home and abroad the latest development of efficient mixing machine, solves the problems of powder material is difficult to mix, have other mixing equipment to meet the mixing effect.

One, mixing evenly, could not find any small balls and small;

Second, the mixing time is short, every time mixed 150 kg powder only 3 to 4 minutes;

Three, feeding, feeding is very convenient, when feeding, little material, the raw material one-time added into water, then cover according to the set time to boot. As long as the pull board, when feeding on or point move can make material release completely. So on the operation is simple and health, need not hand to contact materials;

Four, clean simple, as long as you add water to the hopper, boot, and then released, the water can be cleaned;

Five, ZGH type vertical high-speed mixer sealing structure is carefully designed, sealed performance is reliable, maintenance, dismantling is convenient, all gear after heat treatment, long service life.

The working principle of
　　ZGH type vertical high-speed mixer is designed for powder mixing and developed high efficient mixer set ZGH type vertical high-speed mixer feeding at the bottom of the blade and the blade of high-speed broken material. Feeding material at the bottom of the blade will be continuous along the wall feeding up. High-speed broken material from blade to blade material thoroughly broken material, make the material circulation swirl formation, in a relatively short period of time to achieve the purpose of mix material evenly.

Structural characteristics of
　　

Its main characteristics are the following several kinds:

1, due to the effect of centrifugal force, ZGH type vertical high-speed mixer feeding material along the wall at the bottom of the blade will be at the bottom of the continuous feeding upwards, the upper material from center back down, make the material circulation form a spiral.

2, high-speed broken material from blade to blade feeding block material completely broken.

3, due to the above two kinds of high-speed rotating blade, so can make the material in a relatively short period of time to achieve the purpose of mixing, the mixing speed and uniform speed is out of reach for the domestic various mixer, mixing after intermediate no granular material, mixing rate by one hundred percent;

4, open feeding valve, discharge speed, equipment cleaning easier

5, ZGH type vertical high-speed mixer contact materials are made of stainless steel, will not produce in the process of mixing material volatilize, deterioration and loss.

Range of application
　　 ZGH type vertical high-speed mixer applies to different proportions of dry and wet materials mixing, especially suitable for the chicken essence, medicine, beverage infusion of stirring, a variety of complex mixed materials such as in chicken essence and other spices, pharmaceutical, chemical raw materials of powder material mixed with has been widely used.

Technical parameters